DisboPOX W 442

Field of Application

Interior mineral floor spaces and hard asphalt screeds, exposed from low to average loads, in the private sphere or industrial and commercial sectors.
Floor spaces in garages, cycle-stands, wash and sanitary rooms.
Due to the emission-minimised and TÜV monitored formula particularly suitable for all sensitive areas, as e.g. lounges, hospital facilities, nursery schools and day-care facilities for children, schools, etc.

Material Properties

• High impact strength
• Excellent cleanability
• Very good abrasion resistance
• Little abrasive wear
• Allows water vapour diffusion
• Good chemical resistance
• Tire resistant – Resistant to the penetration of plasticizers/softening agents
• Ecologically compatible, because water-thinnable (dilutable)
• Emission-minimised, tested for harmful substances and monitored by Technical Control Board (TÜV)

Material Base / Vehicle

Water-thinnable, 2-component epoxy resin

Packaging/Package Size

Standard

5 kg, 10 kg plastic combi-packaging

ColorExpress

5 kg, 10 kg plastic combi-packaging

Color

Standard

10 kg container: Kieselgrau (Gravel Grey), Betongrau (Concrete Grey), Mittelgrau (Medium Grey).
5 kg container: Kieselgrau (Gravel Grey), Betongrau (Concrete Grey).
Special colors available on request.

ColorExpress

Over 25,000 shades are available in the ColorExpress stations. Exclusive coloring is possible due to the color shades of the FloorColor Plus collection. Depending on the shade, base 1, base 2, or base 3 can be mixed via ColorExpress stations.
Slight discolouration and chalking effects may occur with weathering and UV light exposure. The colorants in, e.g., coffee, red wine, or leaves (organic dyestuffs) and various chemicals, e.g., disinfectants, acids, etc., may cause discoloration. Scratch marks may appear on the surface due to continued rubbing/sliding. The proper functioning of the coating will not be affected by these changes.

Gloss Level

Glossy

Storage

Keep in a cool, dry and frost-free place. Shelf life of the original, tightly closed packaging: Minimum 2 years. If temperatures are low, the material should be stored at 20 °C before application.

Technical Data

• Density: Approx. 1.4 g/cm³
• Dry film thickness: Approx. 35 µm/100 g/m²
• Resistance-count for diffusion µ (H₂O): Approx. 20,000
• Abrasion to Taber (CS 10/1000 U/1000 g): 66 mg/30 cm²